Product details
The LCC2 Touch is the climate computer we specify most often for growers taking their first step into automated climate control. It runs every climate function in a single compartment from one compact, IP65-rated unit, and its touch-screen interface is genuinely straightforward: clear icons, plain menus, and quick switching between languages.
Behind the simple screen sits serious control logic. The LCC2 Touch divides the day into six time zones (four day, two night) that can track sunrise and sunset automatically, and its energy balance model calculates the heat demand of your greenhouse from the K-factor, screen state, air change and lighting, so regulation anticipates rather than reacts. Cascade vent control opens the wind and lee sides together, keeping ventilation effective even at small opening percentages.
Because it communicates over Ethernet and runs on an updatable operating system, the LCC2 Touch grows with you: add sensors, connect several LCC units into one network, or link to SuperLink for central data analysis. A shared weather station with wind speed and direction comes as standard and can be extended with rain and light sensors.
Every LCC2 Touch we supply is specified, installed and supported by Sitetech as the main UK distributor for DGT by Senmatic, so the person who configures your climate control is the same person who answers the phone afterwards.
As an entry point into automated irrigation controllers, the LCC2 Touch gives single-site growers one interface for watering alongside heating, ventilation and CO2 — without the complexity of a multi-compartment setup.
Key capabilities
- Controls all climate functions in one compartment
- Heating valves: up to 4 | Vents: 4 (top, or top and side)
- Screens: 2 (or 1 screen + 1 blackout) | CO2 control
- Artificial light: 4 zones | Misting valve: humidity-controlled
- Irrigation: 1 valve with supply pump program
- 6 time zones (4 day + 2 night) with sunrise/sunset correction
- Energy balance model and cascade vent control
- Triple tariff support; 2-step heating and venting for fan heaters or cooling units
- Horizontal air fans (2), activated by temperature and humidity | ring main control
- Ethernet communication; connects to SuperLink
- I/O: 2 digital in, 18 digital out, 8 analogue in, 2 analogue out
Technical specifications
| Supply voltage | 100 – 240 V AC, 50/60 Hz |
|---|---|
| Power consumption | 65 VA |
| Communication | Ethernet |
| Operating temperature | 0 – 50°C, no direct sun radiation |
| Humidity | 0 – 95% RH, without condensation |
| Protection rating | IP65 |
| Dimensions (L x W x H) | 350 x 250 x 130 mm |
| Weight | approx. 6.5 kg |
